TECHNICAL SPECIFICATIONS
| Raw Material Source | 100% Purity Natural Mineral Gypsum enhanced with imported premium Beta hemihydrate binders. |
| Physical Visual Appearance | Ultra-fine, pristine white powder matrix. |
| Whiteness Index (%) | 72% + Absolute Dazzling Whiteness |
| Dry Bulk Density | 620 Kg/m³ to 660 Kg/m³ (Optimized lower density providing lightweight ease and higher product volume yield). |
| Initial Setting Time | 8 to 12 Minutes (Perfect balance between adaptive workability and fast drying times). |
| Final Drying / Setting Window | 72 Hours (3 Days) for full moisture evacuation and structural readiness for paint. |
| Powder to Water Blending Ratio | 2 parts powder to 1 part clean water by weight (Adjustable up to 1 Kg powder to 700g water). |
| Residue on 90 Micron Sieve | Under 0.2% maximum (Outperforming competitive baselines which allow up to 4% - 5% |
| Residue on 150 Micron Sieve | 0.0% Absolute Zero Retention for an exceptionally smooth finish. |
| Dimensional Expansion (24 Hrs) q | Strictly None / Zero Expansion or Volumetric Contraction (Visually & Electronically Tested). |
| Transverse Strength | 26.5 Kg/cm² (Significantly exceeding the standard 5-8 Kg/cm² industry requirement). |
| Compressive Adhesion Strength | ≥ 4.5 N/mm² after a 28-day full setting cycle. |
| Estimated Structural Coverage | 24 to 26 Sq.ft per 25 Kg Bag at 12mm thickness (Maximizing project area cost savings). |
| Recommended Application Thickness | 6mm to 15mm in a single coat application sequence on walls or ceilings. |
| Product Shelf Life Range | 6 Months from date of packaging when safely stored on elevated dry platforms. |
| Packaging Layout | Heavy-duty, moisture-sealed multi-wall 25 Kg laminated valve bags. |
Paint Master Gypsum Plaster (POP) is a premium, state-of-the-art internal architectural base coat plaster engineered for False Ceilings, and direct single-coat application over raw masonry, brick walls, AAC blocks, concrete segments, and RCC ceilings. Unlike normal local Plaster of Paris powders that suffer from rapid cracking, uneven setting, high gritty residues, and poor coverage, Paint Master is calcined under highly calibrated, digitally controlled thermal environments. By adjusting particle size distribution and incorporating premium polymer additives, Paint Master eliminates the need for sandcement undercoats, reducing labor steps on the job site while delivering an elite, velvet-smooth matte white canvas that reduces putty and topcoat consumption.
Frequently Asked Questions
Paint Master sets a higher standard across three main metrics: Whiteness, Fineness, and Material Yield. It delivers a 72%+ whiteness index and brings residue grid retention down to a negligible 5% on a 90-micron sieve. This ensures an exceptionally smooth, silk-like wall finish while covering up to 26 sq.ft per bag at 12mm thickness, lowering overall wall putty usage.
Always follow the 'Plaster to Water' sequence. Slowly sprinkle 2 parts of Paint Master Gypsum Plaster powder into 1 part of clean water. Let the dry powder absorb water naturally for 1 to 2 minutes, then stir thoroughly with a low-speed mechanical paint mixer to achieve a uniform, lump-free paste. Never add extra dry powder into an already setting mix, as this disrupts the chemistry and reduces the pot life.
No, it is entirely self-setting. Unlike sand-cement surfaces which must be sprayed with water for a week, Paint Master POP locks in its hydration matrix naturally, saving thousands of liters of water and speeding up painting timelines. Allow the surface to dry naturally for 2 to 3 days before applying any finishing coats.
The product features a standard shelf life of 3 months, which can extend up to 6 months if stored in its original, sealed bag under proper conditions. Bags must be stored on elevated wooden or concrete dry platforms under cover, following a 'First In, First Out' (FIFO) usage model to protect the plaster from ambient air humidity.
